MEASURING, MARKING & PRACTICE

What is the name of part marked as X?

Beam Fixed jaw Vernier scale Depth measuring blade

What is the name of the part marked as x?

Cap Lock Stock Graduated sleeve

What is the least count of the metric outside micrometer? 0.01 mm 0.10 mm 0.0001 mm 0.00001 mm

Which part ensures uniform pressure on the measuring faces in the outside micrometer? Barrel Spindle Anvil Ratchet stop

Which is the fixed measuring face of micrometer? Anvil Barrel Spindle Thimble

Which instrument is used to measure the diameter of camshaft journals? Depth micrometer Three-point internal micrometer Inside micrometer Outside micrometer

Which material is used in the outside micrometre anvil? Brass Bronze Carbon Carbide

What is the name of the part marked as X?

Anvil Frame Spindle Thimble

What is the name of the part marked as x?

Anvil Frame Spindle Thimble

How many equal thimble divisions are made in outside micrometer? 30 Divisions 40 Divisions 50 Divisions 60 Divisions

What is the value of one thimble division reading in outside micrometer? 0.05 mm 0.01 mm 0.02 mm 0.03 mm

What is the name of the measuring instrument?

Depth gauge Bore dial gauge Telescopic gauge Vernier gauge

What is the name of the part marked as X?

Spindle Plunger Centering shoes Fixed anvil insert

What is the name of the part marked as X?

Spindle Plunger Fixed Anvil Insert Centering shoes

What is the name of the part marked as X?

Stem Plunger Fixed Anvil Insert Centering shoes

Which part actuates the movement of the dial for reading measurement of dial bore gauge? Stem Plunger Fixed anvil Centering shoe

Which instrument used to read the telescopic gauge measurement? Depth micrometer Inside micrometer Outside micrometre Three point internal micrometer

What is the name of the part marked as X?

Anvil Stem Plunger Pointer

Name the part marked as x.

Anvil Clamp Plunger Stem

Which instrument is used to check the endplay of crankshaft? Dial test indicator Telescopic gauge Bore dial gauge Slip gauge

What is the name of the gauge?

Feeler gauge Snap gauge Telescopic gauge Plug gauge

Which can be measured by feeler gauge? Radius Screw pitch Surface roughness Gap between mating parts

Which marking media is used on the rough surfaces? White wash Prussian blue Copper Sulphate Cellulose lacquer

Which marking media used to mark in the finished surfaces? White wash Prussian blue Copper Sulphate Cellulose lacquer

Which marking media is poisonous? White wash Prussian blue Copper sulphate Cellulose lacquer

What is the name of equipment?

Surface plate Angle plate 'V' Block Parallel Block

What is the basic unit of length as per SI unit? mm cm metre km

What is the least count of engineer steel rule? 1 mm 0.5 mm 2 mm 3 mm

Which marking device used to scribe circle? Jenny caliper Inside caliper Spring divider Outside caliper

Which instrument is used to check the right angle? Steel rule Try square Firm joint caliper Spring Joint caliper

What is the use of outside calliper? Check the flatness Check the angle Check the internal dia of the job Check the external dia of the job

What is the name of the calliper?

Inside caliper Outside caliper Firm joint caliper Spring joint outside caliper

What is the name of calliper?

Firm joint caliper Spring joint caliper Inside caliper Jenny caliper

Name the part marked as x.

Snug Spindle Guide pin Rocker arm

Name the part marked X in universal surface gauge?

Snug Scribe Rocker arm Vee groove