MEASURING, MARKING & PRACTICE

What is the point angle of centre punch? 30° 45° 60° 90°

What is the angle of prick punch? 60° 90° 120° 180°

What is the name of the chisel?

Flat chisel Cross cut chisel Half round nose chisel Diamond point chisel

What is the name of the chisel?

Flat chisel Cross cut chisel Half round nose chisel Diamond point chisel

What is the name of the chisel?

Flat chisel Cross cut chisel Half round nose chisel Diamond point chisel

What is the name of part marked as x?

Face Pein Cheek Eye hole

What is the name of the hammer part marked as x?

Cheek Wedge Face Eye hole

What is the name of the device?

Pipe vice Hand vice Pin vice Bench vice

What is the name of the vice?

Pipe vice Hand vice Tool maker vice Bench vice

What is the name of the plier?

Slip-joint plier End cutting plier Flat nose plier Side cutting plier

What is the name of the tool?

Jack Puller Wrench Extractor

What is the working media of pneumatic tool? Oil Air Water Kerosene

What is the name of the screw driver?

Recess screw driver Ratchet screw driver Stumpy screw driver Offset screw driver

What is the material used to make Allen keys? Cast iron Aluminum alloy High speed steel Chrome vanadium steel

What is the use of a bench vice? To hold a work piece To hold a tool To hold a work table To hold a chuck

What is the name of the spanner?

Open spanner Tubular spanner Socket spanner Ring spanner

What is the name of the spanner?

Socket spanner Tubular spanner Hook spanner Adjustable spanner

What is the name of the part marked as X in vernier caliper?

Beam Lock screw Sliding unit Movable jaw

What is the least count of vernier caliper in metric system? 0.1 mm 0.01 mm 0.02 mm 0.001 mm

Which measuring instrument used to measuring inside, outside and depth of workpiece? Steel rule Micrometre Dial caliper Vernier calliper

Which part of vernier caliper used to measure internal and external measurement? Beam Sliding unit Fixed jaw Movable jaw

What is the smallest possible measurement that can be taken with the depth micrometre? 0.01 mm 0.02 mm 0.001 mm 0.002 mm

What is the measuring instrument used to measure diameter of a piston pin? Depth micrometer Inside micrometer Outside micrometer 3 point internal micrometer

Which instrument not used to check inside size of slots? Vernier calliper Outside micrometer Inside micrometre Telescopic gauge

What is to be checked with vacuum gauge? Leak in the cooling system Leak in the air brake system Leak in the inlet-manifold system Leak in the hydraulic brake system

What is the Purpose of chisel? Grinding Machining Reaming Chipping

Which chisel is used to remove metal from large flat surface? Flat chisel Cross cut chisel Half round nose chisel Diamond point chisel

Which type of chisel used for squaring material at the corners? Flat chisel Half round chisel Cross cut chisel Diamond point chisel

What is the purpose of the eye hole in an hammer? Strike the job Fix the handle Reduce the weight Stamp the details

What is the use of lump hammer?

Strike the metal Punch the metal Spread the metal Light demolition work

What is the purpose of mallets? Riveting operation Strike on soft metal Strike on hard metal Spread the metal to all sides

Which screwdriver is used in the space limitation? Cross-recess screw driver Ratchet screw driver Stumpy screw driver Offset screw driver

Which vice is used to hold a very small diameter job? Pipe vice Hand vice Pin vice Tool maker's vice

Which condition the tyre pressure not to be checked? Tyre is cold Tyre is carrying load Before start of journey Tyre is hot after long run